• Trainers were very helpful and knowledgeable. I found the Civil 3D course very helpful!
     
    A.V.
    Terra Engineering, Ltd.
  • Thank you so much! The Revit family you worked up performed perfectly, and using the documentation you sent, I was able...
     
    M.T.
    Design & Development Division - Missouri Dept. of Conservation
  • Best experience I have had in a class like this – excellent instructor as well!
     
    A.R.
    Ragan-Smith Associates
  • Great course. Instructor moved at a steady pace and didn't hesitate to ask questions or slow down/speed up when...
     
    J.D.
    Bartlett & West
  • Seiler provided an excellent training experience...including the pre-class setup, class training, as well as support...
     
    S.K.
    William Tao & Associates
  • Appreciated the flexibility, answers and methods of teaching to accommodate our needs. Excellent Staff!
     
    J.L.
    Little & Associates, Architects
  • Thank you to everyone at Seiler for hosting and presenting the BIM Computer class on Revit. Excellent overview of the...
     
    J.E.
    AGC-STL
  • Good course outline! Tips and Tricks provided will be useful!
     
    B.L.
    Ayres Associates
  • Great Instructor!
     
    T.A.
    Mohr & Kerr Engineering and Land Surveying, P.C.
  • Pam is very thorough and demonstrates a clear ability to relay information and answer questions. She is friendly, patient...
     
    J.W.
    PGAV

How to register and activate your GeoSLAM PANO

How to easily register and make sure your GeoSLAM PANO is activated.

Make sure you register the PANO through the link from the PANO USB Drive or here: Please register your ZEB PANO software here: geoslam.com/zebpanoregistration

Then open the HUB software, then open Draw (any project will work) – in Draw go to the File Menu(1), select Settings, in Settings you need to verify that the Sketch Panorama (2) is checked like in the image below(3).

 

That’s it, after GeoSLAM links the registered PANO to your GeoSLAM unit you should be ready to go.

If by chance the license isn’t updated, you may need to refresh entitlements from Hub like the image below shows.

You should now see Add PANO Images in your Hub dataset location when you select the browse button

Needing tech support?
Email us at [email protected] or call direct at 636-923-2662